The BLJ-06 (6 T/D) & BLJ-10 (8-10 T/D) batch operating pyrolysis plant can handle these raw materials, such as waste tires, plastics, rubber, oil sludge and the final products are fuel oil, carbon black, steel wire (for tires). This batch type does not need pre-treatment devices and the raw materials can be put into the reactor directly. It works 1 shift per day and its reactor needs about 3-4 hours to cool down before the second batch.
The main parts of the batch type include reactor, casing, manifold, heavy oil tank, oil condenser, oil tank, hydroseal, auto carbon black discharger, burning room, air blow, gas gun, flue condenser, dedusting system, water tank, cooling tower.
The following are the security designs of bath type:
1.The main components of the exhaust gas that cannot be condensed to oil are alkanes, which are dangerous if burned directly. The hydroseal can remove their sulfur, impurities and then the clean gas can be recycled to the burning room to be used as fuel. Besides, the hydroseal can also stop the gas burning back.
2. It is equipped with automatic welding machine, which can not only greatly improve working efficiency, but also guarantee the welding quality.
3. Professional thermometer and pressure gauge to inspect temperature and pressure at any time.
4. The latest heating method which combines the advantages of direct and indirect heating can prolong the service life of the reactor for 5-8 years.
5. In the daily operation, the exhaust gas room is closed. If the pressure is too high, you can open the door of the exhaust gas room and the combustion gas can be burned directly, which can quickly reduce the temperature and pressure in the reactor.
|Raw Materials||Waste Plastic, Tyre, Rubber, Oil Sludge|
|Pattern||Horizontal & Rotary|
|Heating Materials||Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.|
|Floor Area (L*W*H)||30*10*8m||30*10*8m|
|Operating Pressure||Normal Pressure|
|Cooling Method||Water Cooling|
|Life span||5-8 Years|