Plastic To Diesel

Plastic To Diesel

To convert plastic to diesel, two plants are necessary. First, you should turn the plastic waste into fuel oil with the waste plastic pyrolysis plant. Then the waste oil distillation plant can refine the plastic pyrolyis oil into diesel. Then qualified diesel oil can be directly used in more kinds of low speed engines and generators.

Plastic To Diesel
Plastic To Diesel

Details about Waste Plastic to Diesel Process

1. Process the waste plastic in the waste pyrolysis reactor, and after the high temperature pyrolysis, you can get plastic pyrolysis oil.

2. Transport the plastic pyrolysis oil into the reactor by the oil pump. Heat the reactor, then the oil will be turned into gas, which goes into the cooling system through the distillation tower.

3. The cooling system can cool down the oil gas by using cycling water, and the oil gas will be condensed into oil. After the process of pickling, alkali washing and filtering, you can get the qualified diesel oil.

4. The gas can not be condensed will be sent to heat the reactor through water seal.

5. All the smoke will go into the air after the dedusting system.

In the plastic to diesel process , the waste oil refining plant can effectively remove the particles, colloidal matter, acid and odor from pyrolysis oil and waste oil by acid-treatment and filtration.

Item Details
Model BLJ-6 BLJ-10 BLJ-16 BLL-20
Daily Capacity 6T 8T-10T 15-20T 20-24T
Working Method Batch Semi-Continuous Fully Continuous
Raw Materials Waste Plastic, Tyre, Rubber, Oil Sludge
Reactor Size D2.2*L6.0m D2.6*L6.6m D2.8*L7.1m D1.4*L11m
Pattern Horizontal & Rotary
Heating Materials Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power 24kw/h 30kw/h 54kw/h 71.4kw/h
Floor Area (L*W*H) 30*10*8m 30*10*8m 40*10*8m 45*25*10m
Operating Pressure Normal Pressure Constant Pressure
Cooling Method Water Cooling
Life span 5-8 Years

Main Features of Beston Waste Plastic to Diesel Machine for Sale

1. It uses the hot air heating method, thus the service life of the reactor is longer.

2. It is safe to operate. Our plants are equipped with the automatic alarming system and anti-explosion valve, which can ensure the plant work in a safe condiiton.

3. It does no harm to the environment. The totally sealed distillation reactor and distillation tower can avoid gas leakage. Moreover, the three-layer de-dusting system can ensure that the gas emission can reach the European pollution control standards.

waste plastic to diesel plant
waste plastic to diesel plant

4. It has a higher oil yield rate. Taking waste engine oil for example, when the water content is below 5%, the oil yield rate can reach 90%.

5. It is trustful in quality. All of our plants have passed CE, ISO, SGS certificates.

6. It is various in models and operating methods.To satisfy different customers’ demand, we have batch operating waste oil recycling plant BZJ-06 and BZJ-10 and fully continuous BZL-25, BZL-50 and BZL-100 waste oil refining plant for sale. You can know more details from the following chart.

Model BZJ-06 BZJ-10
Capacity 6T/D 10T/D
Oil Yield 5.1T/D 8.5T/D
Working Method Batch
Raw Materials Crude oil, waste oil, fuel oil, used engine oil
Heating Materials Oil, LPG, natural gas, wood, coal, etc.
Power 20KW 36KW
Structural Form Vertical
Cooling Method Water cooling
Operating Pressure Normal and Vacuum
Service Life 5-8 years

So far, our plants have been exported to more than 20 countries, such as Dominica, South Africa, Canada, Peru, Jordan etc, and we have earned a good reputation from our customers. If you want to know more information about our plants, such as the plastic to diesel plant cost, please feel free to contact us. We will reply you within 24 hours.

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.